Place of Origin : Guangdong, China
Brand Name : OptoElectronics
Packaging Details :
1 x Transmitter
1 x Receiver
2 x Power Wires
1 x Use Manual
Supply Ability : 500 Set/Sets per Month
Price : Conact us
MOQ : 1 pair
Payment Terms : T/T
Delivery Time : 20working days
Part Number : OP-EFP-4KSDI
SDI Types : 3G/HD/SD-SDI,DVB-ASI
Standards : SMPTE-424M/292M/259M
Data Types : RS422/RS485/RS232
Distance : 10 Kilometers(SMF)/ 300 Meters(MMF)
Fiber Connector : Single or Dual LC/ST/FC/SC Optional
Chassis : 1U (480 x 250 x 50 mm)
Power Supply : AC 85~260V/ 50Hz
4K SDI over Fiber with Embedded Audio & Data RS422/RS485/RS232 Optic Multiplexer, 4K EFP to Fiber Converter For EFP/OB
BY-EFP-4KSDI Live-Link Remote 4K Camera Interface System consists of camera fiber optic adapter (TX) and fiber optic base station (RX) , The customized design for long-distance transmission of EFP live production system
Features:
1)1 x 4K SDI forward and 1 Ch 3G SDI reverse.
2)Pass all Pathological patterns. Uncompressed lossless transmission without delay over 10 Kilometers Fiber
3)SD, HD, 3G automatic input detection, support 270Mbit / s - 1.48Gbit / s –3Gbit / s rate.
4)Support SMPTE-424M 3Gbps HD-SDI, SMPTE-292M HD-SDI, SMPTE-259M SDI serial digital video signals and DVB-ASI signals
5)Industry-standard connectors for all inputs and outputs; Supports Sony / Panasonic / JVC etc Remote control
Parameters:
Distance: 10 Kilometers (SMF) or 300 Meters (MMF)
Fiber type: 62.5/125um MMF,50/125um MMF, 9/125μm SMF
Fiber Connector: Bi-directional 2 x ST connector
SDI Connector: BNC
SDI Format:
1)All inputs and outputs are equalized and re-clocked
2)Pass all pathological patterns
3)SMPTE424M/292/259 and DVB-ASI compliance
4)Supports embedded audio and data signals
5)Support SD-SDI & HD-SDI & 3G-SDI, Support 270Mbps & 1.485Gbps & 2.97Gbps SDI Video
Dimension of Both Tx & Rx: 19" 1U rack mount (480 x 250 x 50 mm)
Gross.W: 10 Kg
Power Supply AC 85-260V/50Hz
Working Temperature: 0 ℃~+85 ℃ ;
Relative Humidity: 0 ~ 95%
Application:
A television studio, mobile studio
EFP Electronic Field Production, major sporting events, and large celebrations broadcast live
ENG camera (outdoor photo camcorders) upgraded to an EFP camera.
OB Van
Functions:
1 x 4K SDI(4 x 3G-SDI),forward direction
1 x 3G-HDSDI, Reverse direction
2 x Audio, bi-direction, unbalanced audio
1 x RS422 data full-duplex mode
1 x RS232 bi-directional
1 x RS485 bi-directional
1 x Analogue video
1 x Tally
1 x 10/100M Ethernet (RJ 45)
Note: add or remove some functions, please check the below Ordering Information
Forward 4K/12G-SDI
Signal format | SMPTE ST-2082, ST-2081, 424M, 344M, 292M, 259M, DVB-ASI, |
Data rate | 270Mbit/s, 1.48Gbit/s, 2.97Gbit/s, 5.94Gbit/s, 11.88Gbit/s |
Cable Equalization | Automatic cable EQ (Belden 1694A cable) 75 m at 11.88 Gbps (4Kp60 UHD) 120 m at 5.94 Gbps (UHD) 200 m at 2.97 Gbps (FHD) 280 m at 1.485 Gbps (HD) 600 m at 270 Mbps (SD) |
SDI interface | BNC 75 Ohm |
Reverse 3G/HD-SDI input/output:
Signal format | SMPTE 424M, SMPTE 292M, SMPTE 259M |
Data rate | 270Mbit/s - 1.48Gbit/s - 3Gbit/s |
Cable Equalization | Automatic cable EQ (Belden 1694A cable) 250m @ 270Mbit/s, 140m @ 1.5Gbit/s, 80m @ 3Gbit/s |
SDI interface | BNC 75 Ohm |
Genlock / TC / BB
Number of Channels | 1 |
Input/output impedance | BNC 75Ω (unbalance) |
Input/output voltage | 1.0Vp-p |
Differential Gain | < ±1.5% |
Differential Phase | < ±1% |
SNR | >60dB |
Intercom:
Camera Optic Adaptor | |
Interface | 4pin XLR(Male) /5pin XLR(Female)/ 3.5mm headset jack |
Microphone | Mic inputs with mute and pre-amps |
Headphone | with volume up or down |
Optic Base Station | |
Interface | 3pin XLR Female/Male: Party line audio for Clearcom / Altairaudio / Granitesound’s Intercom main station ,or Line level balanced audio input and output DB9(Male): Line level unbalanced audio input and output, |
Tally:
Camera Optic Adaptor | |
Interface | 4pin or 3pin mini XLR |
Output | Dry Contact Closure or wet LED+/- |
On: short or LED on Off: open or LED off | |
Optic Base Station | |
Interface | DB9(Male) |
Input | Dry Contact Closure or TTL |
On: short to GND or TTL low Off: open or TTL high |
Remote:
Camera Optic Adaptor | |
Interface | Sony’s 8 pin interface |
Data | RS422 /RS232/RS485 |
Optic Base Station | |
Interface | Sony’s 8 pin interface |
Data | RS422 /RS232/RS485 |
PGM/IFB:
Camera Optic Adaptor | |
Interface | 4pin XLR(Male) /5pin XLR(Female)/ 3.5mm headset jack |
Headphone | with volume up or down |
Optic Base Station | |
Interface | 3pin XLR Female: Line level balanced audio input |
Ethernet:
Work mode | Full duplex/half duplex |
Data Rate | 10/100Mbps(AUTO) |
connection terminal | RJ45 |
Can be customized.
Company Profile:
We are the leading professional Camera Fiber System Designer/Manufacter in China
Our products and solutions focus on high-definition video, audio, data, Ethernet, contact closure, USB and other fiber optics. The leading products are SD / HD / 3G / 12G-SDI optical transmission equipment (for EFP / ENG / ESP cameras, optical transmission SDI / TALLY / REMOTE control / intercom / return video / TC / Genlock / PGM / Ethernet etc. And Lemo SMPTE311/304 3K.93C remote power for the camera), USB1.1 / 2.0 / USB3.0 fiber extender, 4K HDMI to fiber, KVM (HDMI + USB mouse and keyboard) to fiber, balance audio to fiber, contact closure / data / Ethernet fiber. we can provide the customized products with the short lead time.
Testing review:
4K SDI Over Fiber With Embedded Audio and Data RS422/RS485/RS232 Optic Multiplexer 4K EFP To Fiber Converter For EFP/OB Images |